Execution standard: EN1888; GB14748; ASTM F833
ASTM F833 ul: rotate 360 ° and back again to the side rotate 360 °, each 90 degrees for 1 second.
EN1888 uefa rules: the car forward/backward directions, respectively, at the rate of turn (4 + / - 0.5) each rotate 360 degrees, (repeated the test three times, after each test, the test load block movement, if any, shall be the adjustment to the initial position)
The gauge EN1888 & gb GB14748: first clockwise 100 degrees, 100 degrees counterclockwise. (show 100 degrees with the horizontal plane Angle into)
Technical parameters:
Test point: + / - 360 degrees; Stop can be set at any Angle, Angle control accuracy of 1 degree, every 90 degrees can automatically stop, stop Angle can be set (90, 180, 270, 180).
Test speed: 0-10 times/min (set), complete turn a circle for once
Test time: 999999 h (set), to set a time automatic stop
Test number: 999999 (set), to set the number of automatic stop
Work surface: 1600 * 1400 mm, can do experiment to two baby stroller at the same time
Controller, PLC and touch screen (optional)
Mesa of bench height: turn 180 degrees, 1350 mm from bottom plate to its surface.
Work surface roughness: 1.2 MM thick wire drawing of 304 stainless steel
Bottom edges with 60 * 20 mm steel channel
Bottom panel made of A3 8 mm
The rotating shaft, the diameter of 100 mm
Working mesa substrate is 40 mm board, with 1.2 MM304 stainless steel surface
Clamping fixture can be adjusted, and around a fixed wheels of chrome plated rod, 20 mm in diameter
The power supply voltage: AC220V / 50/60 hz
The workbench bearing cap: 100 kg
Weight: 230 kg
