GG-029 foam compression stress testing machine
Foam compression tester, foam compression tester, reciprocating compression bending test machine, compression spring testing machine, plastic foam repeated compression testing machine
Test piece placed in the machine compressed between the plates, compression 25% of the specimen height, stay 20 seconds, the load divided by the area of the specimen, the hardness of the material is compressed.
Technical Parameters:
1. can be set on the foam urging the holding pressure time
2. Sensor Capacity: 0 ~ 100KG
3. Power Accuracy: ≤ ± 1%
4. Display: Digital Display
5. The pressure plate size: the ¢ 200mm, at 350 × 350 (mm)
GJ-030 foam repeated compression testing machine
After the accurate measurement after the test piece thickness, as between testing machines compression plates, at a frequency of 60 times per minute, 50% compressed specimen height, 80,000 times reciprocating compression after placed for 30 minutes at room temperature, measured in terms of its thickness the compression ratio.
Standards based: ISO-7214, JIS-K6767, K6382
1. The compression stroke: 0 ~ 50mm (adjustable)
2. plate spacing: about 200mm (adjustable)
3. platen area: 30 * 30cm
4. Motor: 1 / 3HP
5. Counter: LCD, 0 ~ 999,999
6. Volume: 60 * 40 * 75cm
7. Weight: 102kg
8. Power: 1∮, AC220V, 5A
